MATERIAL SAFETY DATA SHEET

(updated 1/10/2004)

Drainchem

P.O. Box 5001    Sandhurst East 3550

Phone: 03 5448 4355  Mobile: 0409 850 577

info@drainchem.com.au

http://www.drainchem.com.au/

Click Here to Download the Grease Release MSDS in PDF Format

PRODUCT NAME:              GREASE RELEASE™

CHEMICAL NAME:            A proprietary blend of alkyl sulfates, alkyl aryl sulfonates, alkyl aryl ethoxylates,

                                                fatty acid ethanolamides, glycols and isopropanol.  Contains 3% w/w of isopropanol.

SECTION 1 – PHYSICAL DATA

Boiling Point:                                                        >100*

pH (5% solution):                                                 9.79

Specific Gravity:                                                   1.053 20/20* C

Melting Point:                                                       N/A

Vapor Density:                                                     2.1 (estimated)

Vapor Pressure:                                                    33 mm at 20 Deg. C (estimated)

Evaporation Rate:                                                1.7 (water = 1) (estimated)

% Volatiles by Volume:                                       N.D.

Appearance & Odor:                                           Yellow colored liquid

                                                                                Mild odor

Solubility in Water:                                              Complete

SECTION II – FIRE AND EXPLOSION HAZARD DATA

Flash Point (Test Method):                                130* F (PMCC)

Extinguishing Media:                                          Water, CO, Dry Chemical

Unusual Fire & Explosion Hazards:                  None

Special Fire Fighting Procedures:                      None

SECTION III – REACTIVITY DATA

Stability:                                                                Stable

Incompatibility:                                                    Strong Oxidizing Agents

Hazardous Decomposition Products:               None

Hazardous Polymerization:                                 Not Known to Occur

Conditions to Avoid:                                          Excess Heat

 SECTION IV – HEALTH HAZARD DATA

Threshold Limit Value (TLV):                             For Isopropanol – 400 ppm ACGIH

Extreme Effect of Overexposure:                        Ingestion or inhalation of large quantities of vapor  may cause flushing, headache,

                                                                                dizziness, nausea, vomiting.

Eyes:                                                                      Contact can cause severe irritation, redness, blurred vision.  Extended contact can cause eye damage.

Skin:                                                                       No effect of exposure expected due to contact.  Mildly irritating.  May possibly cause irritation or

                                                                                dermatitis in some individuals upon prolonged contact.

SECTION V – EMERGENCY & FIRST-AID PROCEDURES

Eyes:                                                                      Flush with plenty of water for at least 15 minutes.  Get medical attention if eye irritation persists.

Skin:                                                                       Flush with plenty of water.

Ingestion:                                                              Get medical attention immediately.

Inhalation:                                                             Move person to fresh air or very well ventilated area.  If any problems persist get medical attention

SECTION VI – TOXICITY

Acute Toxicity:                                                     Not a pesticide or an herbicide.

SECTION VII – SPILL OR LEAK PROCEDURES

Steps to be taken in case                                   

material is released or spilled                             Contain with inert material and sweep up then wash away with water.  Spills are slippery – use care to

                                                                                prevent falling.  Dispose of in accordance with local, state and federal regulations.

SECTION VIII – SPECIAL PROTECTION INFORMATION

Eye Protection:                                                     The use of goggles is suggested

Skin Protection:                                                    Avoid Contact.  Wear gloves

Ventilation:                                                            Use in well ventilated area

Respiratory Protection:                                       None required in well ventilated area

Other:                                                                     Water should be available to wash off any spills

SECTION IX – SPECIAL PRECAUTIONS

Precautions to be taken in

Handling & storage:                                            Avoid storage at high temperatures.  Use good industrial practice with regard to housekeeping and

                                                                                personal hygiene.

Other Precautions:                                               Avoid prolonged and repeated skin contact and chances of splashing in eyes.  Keep out of reach of children.

The information and statements in this Material Safety Data Sheet are believed to accurately reflect the scientific evidence used in making the hazard determination but is not to be construed as warranty or representation for which we assume legal responsibility.